AIR CLEANING SPECIALISTS
826 Horan Drive Fenton, Missouri 63026
Phone: (636) 349-4400 Fax: (636) 349-0556
Toll Free: 866-455-2130

QF-Duct Systems

  Adapters
  Adjustable Nipples
  Angle Flange
  Auto Diverter
  Beam Clamp
  Blast Gates
  Branch
  Butterfly Valves
  Clamps
  Clamps-Gortex
  Elbows
  End Caps
  Floor Sweeps
  Hose Clamps
  Hoses
  In-Cut
  Man Diverter Valves
  Pipe
  Pipe Bracing
  Pipe Hangers
  Reducers
  Rigid Flex
  Router Hoods
  Stackheads
  Suction Hoods
  Tap-In
  Transitions
  Ultra Flex
  Viewing Spools

3200 - QF PIPE
Laser Welded Seam - Rolled Ends.

Available in galvanized or stainless steel.

Key Benefits

Virtually seamless pipe results from 100% weld penetration as the metal is fused together
Pipe is round (does not flatten at lock form), making it easier to clamp and to create a better seal between sections
No extra cost

DIA ()	PART	LENGTH	GAUGE	GAUGE	ROLL
INCHES	NO	(L)	GALV	SS	(d)
3	3200-03	59.25	24	22	0.2
4	3200-04	59.25	24	22	0.2
5	3200-05	59.25	24	22	0.2
6	3200-06	59.25	24	22	0.2
7	3200-07	59.06	22	22	0.3
8	3200-08	59.06	22	22	0.3
9	3200-09	59.06	22	22	0.3
10	3200-10	59.06	22	22	0.3
12	3200-12	58.75	22	22	0.3
14	3200-14	58.75	20	20	0.3
16	3200-16	58.75	20	20	0.3
18	3200-18	58.75	20	20	0.3
20	3200-20	57.75	20	20	0.4
22	3200-22	57.75	20	20	0.4


3201 - Flanged Pipe Laser Welded Seam - Rolled Ends.
Available in galvanized or stainless steel.

Use this duct system for sizes over 22" dia. longitudinal lockformed seam, galvanized or stainless steel, with Van Stone Angle Flange on both ends.

DIA ()	PART	LENGTH	GAUGE	GAUGE
INCHES	NO	(L)	GALV	SS
3	3201-03	60	24	22
4	3201-04	60	24	22
5	3201-05	78	20	22
6	3201-06	78	20	22
7	3201-07	78	20	22
8	3201-08	78	20	22
9	3201-09	78	20	22
10	3201-10	78	20	22
12	3201-12	78	20	22
14	3201-14	78	20	20
16	3201-16	78	20	20
18	3201-18	78	20	20
20	3201-20	78	20	20
22	3201-22	78	20	20
24	3201-24	78	20	20
26	3201-26	78	20	20
28	3201-28	78	20	20
30	3201-30	78	18	20
32	3201-32	78	18	20
34	3201-34	78	18	20
36	3201-36	78	18	20
38	3201-38	78	18	20
40	3201-40	78	18	20

ORDERING NOTES: Unless specified, 4" through 22" is QF. Over 22" is flanged. Data subject to change without notice. Stainless steel components requiring flanges will be supplied with stainless steel flanges unless otherwise specified. For special parts or items to be custom manufactured, contact us for quotation.

Site Design